The Audex AW Pro range consists of four dirty water pumps – the 2-150 TA, the 2-220 TA, 3-370 TA and the 4-370 TA. The AW Pro range includes all of the features of the standard AW range plus an intelligent control system (ICS) giving you complete protection for your pump.
The pumps are ideal for handling corrosive and abrasive applications and the range offers exceptional service life with minimum running costs and repairs. Reliable, industry-proven and affordable, the pumps are backed by our Pump Servicing Division.
Features and Benefits
Audex AW Pro pumps will not run if they are wired up incorrectly.
This prevents damage to mechanical seals and the impeller which can result from running backwards incorrectly.
The pump turns off if:
– A phase goes down from the power supply
– The motor is overloaded
– The impeller gets jammed
– Incorrect voltage is sensed
This prevents the motor from burning out and prevents mechanical damage to the pump.
The pump will try to restart after five minutes – if the problem still persists it will wait another five minutes before trying again.
Audex AW Pro pumps feature an automatic level control
This prevents damage to the pump from running dry, takes away the need for a control panel and saves power as the pump only runs when it needs to.
There is a 60 second time lag from when the level sensor is activated. This is to prevent a false start and reduce the amount of times the motor starts/stops
The pump stores malfunction history
This allow for correct diagnostics if the pump fails and helps with future preventative action
